Abstract
The method of calculation of wire anchors with a conical tip is given. The calculation is based on the condition of static balance of forces: active and reactive. The theoretical foundations of calculating the bearing capacity of wire anchors with a conical tip are given. The variants of practical application of wire anchors on mountain and foothill landscapes, in construction, in agriculture in the construction of trellis systems and other industries are described. Various options for installing wire anchors are given. The method of installation using vibratory hammers and impact hammers, which can be used when installing wire anchors on chips, is described in detail. When installing wire anchors with a conical tip, it is stretched into a guide rod, which is embedded in the ground with the help of vibratory hammers, by the operator. After installing the wire anchor to the required depth, the guide rod is removed. When installing a wire anchor with a hammer, the operator, lifting it, hits the lower impact device rigidly fixed to the guide rod. Other lever devices for installing wire anchors are described. All innovative developments are patented in the Russian Federation.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
