Wingbeat Shape Modulation for Flapping-Wing Micro-Air-Vehicle Control During Hover

Abstract

A new method of controlling a flapping-wing micro air vehicle by varying the velocity profiles of the wing strokes is presented in this manuscript. An exhaustive theoretical analysis along with simulation results show that this new method, called split-cycle constant-period frequency modulation, is capable of providing independent control over vertical and horizontal body forces as well as rolling and yawing moments using only two physical actuators, whose oscillatory motion is defined by four parameters. An actuated bob-weight is introduced to enable independent control of pitching moment. A general method for deriving sensitivities of cycle-averaged forces and moments to changes in wingbeat kinematic parameters is provided, followed by an analytical treatment for a case where the angle of attack of each wing is passively regulated and the motion of the wing spar in the stroke plane is driven by a split-cycle waveform. These sensitivities are used in the formulation of a cycle-averaged control law that successfully stabilizes and controls two different simulation models of the aircraft. One simulation model is driven by instantaneous aerodynamic forces derived from blade-element theory, while the other is driven by an empirical representation of an unsteady aerodynamic model that was derived from experiments.