Abstract
Increased temperature due to global climate change is increasing the magnitude and frequency of extreme winds making billboard structures more vulnerable. This paper proposes a methodology to determine the structural safety of flexible outdoor single-post billboards. A CFD model of a flexible single-post billboard was performed as an example. Resultant wind forces were obtained for the previous model using different wind speeds. A mechanical numerical model of the billboard was realized, and this was subjected to the resultant wind forces. Internal forces for the most vulnerable places of the billboard were obtained for all different adopted wind speeds. Next, a reliability analysis of the billboard was performed considering several values for the bias factor and coefficient of variation for the internal forces caused by wind. Safety levels determined from the reliability analysis indicate that a billboard designed with a nominal wind speed of 180 km/h cannot achieve the target probability index of 3.2 for wind speed higher or equal to 200 km/h for any of the adopted probabilistic parameters. Significant differences in the found safety levels for the evaluated probability parameters indicate that billboard structures could undergo safety values below the target one with changes in the case where wind characteristics endanger this type of structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.