Abstract
The purpose of this study is to analyze the wind energy resource potential at Hun. Wind data was analyzed using diffrent statistical models and calculations were performed to forecast wind energy & power density at the site. Energy production was estimated using diffrent wind turbines which were selected according IEC standards criteria and performance of these wind turbines. Detailed wind resource data analysis was performed for the proposed site using Excel spreadsheet for one-year period from (April 2011 to March 2012). Th wind data are measured at four heights of (20 m, 40m, 60m and 61m) above ground level (a.g.l). Th analysis showed that the annual average wind speed is 5.69 m/s and the power density is about 190 W/m2 at 61m height. It could be noticed that at 61m height, the highest scale parameter is 7.25 m/s in April while the lowest scale parameter is 5.71 m/s in October. Th annual shape and scale parameters range from 2.27 at 61m to 2 at 20m, and from 6.42 m /s at 61m to 5 m /s at 20m, respectively. 90% of the speeds are below 11m/s, 84% are below 10m/s and 50% are above 6 m/s. Th maximum speed is 21 m/s with 0.14% occurrence. Th wind shear exponent was evaluated as 0.18 and the roughness length for the site as 0.17 m, which indicates that the roughness class for the location is 2.5. According to the performed analysis, the wind turbines suitable for this site should be of class III/B. Comparison of three wind turbines indicated that Vestas V112-3000 gave the highest capacity factor of 42% in April and an availability of 83% while Nordex N100- 2500 gave capacity factor of 41% for the same month and availability of 83.7%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.