Wind erosion control using alkali-activated slag cement: Experimental investigation and microstructural analysis

Abstract

This paper aims to mitigate wind erosion of soil by employing alkali-activated slag. Wind tunnel tests were conducted on soil samples treated with varying percentages of slag at different wind speeds (7, 14, 21, and 28 m/s) and under a sand bombardment condition. In the absence of saltating particles, the erodibility ratios of the alkali-activated slag-treated samples with weight percentages of 1%, 2%, 4%, and 6% to the untreated sample at the highest wind speed (i.e., 28 m/s) correspond to 0.19%, 0.10%, 0.08%, and 0.06%, respectively. Moreover, in the presence of saltating particle bombardment, these samples exhibited erodibility reductions of 98.5%, 98.8%, 99.4%, and 99.6% compared to the untreated sample. The strength of the formed crusts, determined by penetrometer tests, increased significantly for the treated samples, ranging from 1300 to 6500 times greater than the untreated sample. The complementary analysis using x-ray diffraction and field emission scanning electron microscopy revealed the formation of albite and anorthite crystals along with the formation of calcium aluminosilicate hydrate, sodium aluminosilicate hydrate, and calcium silicate hydrate gels in the cementation process. Overall, the study highlights the effectiveness of alkali-activated slag in forming strong crusts that provide substantial protection against wind erosion, resulting in a significant decrease in wind erodibility.