Wind energy statistics for large arrays of wind turbines (New England and Central U.S. Regions)

Abstract

The performance characteristics have been simulated for large dispersed arrays of 500–1500 kW wind turbines producing power and feeding it directly into the New England or Central U.S. utility distribution grids. These studies, based on design power performance curves, indicate that in good wind environments the 500 kW generators can average (on an annual basis) up to 240 kW mean power output, and the 1500 kW generators can average up to 350 kW mean power output. Higher mean power output (averaging up to 470 kW) is indicated, however from a hypothetical 1125 kW rated power unit designed to operate at wind speeds near those observed throughout the study area, rather than the higher design operating wind speed of the 1500 kW unit. The beneficial effect of operating large disperse arrays of wind turbines is that available power output can be increased—if winds are not blowing over one part of the array, chances are they will over some other part of the array. These studies indicate that wind power availability levels of 200 kW per 1125 kW generator were 77–93 per cent, depending on season. Reasonably steady high wind power in winter and high afternoon peak wind power in summer (corresponding to peak air conditioning load) means that significant peak load displacement can be achieved without the use of storage.