Wideband Precoding for RIS-Aided THz Communications

Abstract

Reconfigurable intelligent surface (RIS)-aided terahertz (THz) communication has been considered as a promising technology for enabling future sixth-generation (6G) wireless systems. Due to the exploitation of extremely large bandwidth and large scale of RIS, RIS-aided THz communications would suffer from the beam split effect, where the generated beams cannot be aligned with the target physical direction in the whole bandwidth, so a severe array gain loss will be introduced. In this paper, the beam split effect is first analyzed in the existence of RIS. Then, a novel sub-connected RIS architecture is proposed to mitigate the beam split effect. The crux is to introduce additional time-delay (TD) modules and phase shifters into RIS elements so as to convert the classical phase-only precoding to the joint phase and delay precoding. Accordingly, a wideband precoding design is proposed to compensate for the severe array gain loss, and the performance analysis on the array gain is also provided. After that, we extend our discussions to the emerging scenarios with massive antennas equipped at the base station (BS), where the effect of “double beam split”, i.e., the coupling of beam split at the BS and the RIS, occurs. We prove the decomposability of the array gain, based on which the double beam split effect can be addressed by separately optimizing the wideband precoding at the BS and the RIS. Simulation results demonstrate that our proposed sub-connected RIS significantly alleviates the beam split effect with a small number of TD modules, and it is capable of achieving sub-optimal achievable rate performance with acceptable hardware cost and power consumption.