Abstract

In this communication, a single-layer differentially fed microstrip patch antenna (MPA) with wide bandwidth and low profile is proposed. The proposed antenna is composed of a patch radiator and a substrate integrated waveguide (SIW) cavity. In this work, a square SIW cavity is concentrically embedded within a square patch radiator. Here, the two dominant resonant modes in the radiative patch resonator and nonradiative SIW cavity, namely, TM10 and TE21, are both employed to achieve a wide impedance bandwidth under dual resonances. At first, the resonant properties of these two modes are investigated based on the cavity model theory. Then, their resonant frequencies are extensively discussed, aiming at reallocation of these two modes in proximity to each other by properly selecting the geometrical dimensions of the square patch resonator and SIW cavity. After that, the spacing between adjacent metallic pins of the SIW cavity is studied to reveal its influence on both radiation and bandwidth properties. As such, proper spacing is selected toward stable radiation gain over the whole band of operation. Finally, the feeding positions of the MPA are studied to determine the input impedance of the antenna toward wide impedance matching in a wideband. To verify the predicted results, a prototype antenna is fabricated and measured. The simulated and measured results are found in good agreement with each other and both of them illustrate that the proposed antenna achieves a wide bandwidth of about 11.43% at a center frequency of 3.5 GHz and a stable gain in the range of 8.09 to 9.04 dBi within the whole band. Moreover, this antenna is a low-profile structure with a height of 0.037 free-space wavelength.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.