Abstract
Radio frequency (RF) repeaters are often used in satellite communication, wireless wideband communication, and electronic warfare systems for signal receiving, forwarding, and processing. Due to frequency-dependent microwave devices, conventional electrical RF repeaters have limited bandwidth and are susceptible to electromagnetic interference. In this article, a dual-channel photonic RF repeater using a polarization-division multiplexing dual-parallel Mach–Zehnder modulator is proposed. The RF repeater is built entirely using optical methods and does not require any frequency-dependent equipment, thus enabling high operating frequency and large operating bandwidth. The modulator is used to perform frequency conversion on the received uplink/downlink RF signals, and the followed polarization controller and the balanced photodetector realize switching of the uplink and downlink RF channels. In the experiment, wide operating bandwidth (1–20 GHz), low channel crosstalk (>33 dB), and a large spurious-free dynamic range (106 dB·Hz2/3) for the RF repeater are obtained. Also, the channel switching of 16 quadrature amplitude modulation (QAM) RF signals with 200 Mbps data rate is demonstrated, while the adjacent channel power ratio (ACPR), demodulated constellation diagrams, and the error vector magnitude (EVM) are evaluated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.