Abstract
An effective operation mode and a space-time synchronization technique for the spaceborne/airborne hybrid bistatic synthetic aperture radar (SA-BSAR) using sources of opportunity are presented. Ourmotivation lies in the fact that the existing approaches in the literature, where the transmitter antenna must be steered, can only be used in the hybrid bistatic SAR systems with cooperative transmitter. The presented mode is to widen the receiving beam for the purpose to increase the scene extension in azimuth. The inspiration comes from the much shorter receiving distance as compared to the one in mono-static spaceborne SAR. This means that the receiving gain can be significantly reduced to provide the same signal-to-noise ratio (SNR) with respect to the mono-static case. The feasibility of the wide-beam mode is first preliminarily verified by a quantitative analysis of SNR and a demonstration that the pulse repetition frequency (PRF) used in the spaceborne illuminator can easily satisfy the PRF constraints of the SA-BSAR. The influence on the azimuth ambiguity to signal ratio (AASR) is also discussed and the corresponding broadening factor of the maximum allowable for receiver beamwidth is subsequently derived. Afterwards, the formulae for calculating the overlap time, the scene extension and the azimuth resolution are deduced. As there are no grating lobes in satellite antenna pattern since the non-cooperative illuminator normally operates in the side-looking mode, an existing technique for the space-time synchronization in cooperative hybrid systems can not be directly applied. The modification performed and its underlying principle are presented in detail. The simulation results demonstrate the effectiveness of the wide-beam mode, and show that in most cases a useful scene extension (on the order of at least 1km) can be achieved with a roughly equivalent azimuth resolution as compared to the one in mono-static spaceborne SAR. In some cases, explicit measures to suppress the azimuth ambiguity must be taken to achieve the expected scene extension.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
