Abstract
AbstractThe wetting properties of thermally bonded polyester nonwoven fabrics with different basis weights were studied. These nonwovens had the same composition: 85% poly(ethylene terephthalate) and 15% poly(butylene terephthalate) fibers. Two techniques, the 3S wicking test and sessile drop method, yielded similar water contact angles for all the nonwovens, but these results differed from the values obtained with the single fibers. In the nonwoven fabrics, the pore structure played a dominant role in the wetting properties: the existence of large pores in the thinner nonwovens reduced the dimensions of the liquid–solid interfacial perimeter. Compared with the water contact angle of the constituent single fibers, the contact angle of the fabrics was increased. A crenellated surface model was created to quantify the influence of pores on the wettability of nonwovens. It was possible to deduce the surface porosity of the fabric with this model, but only in the case of contact with nonwetting liquids such as water: this surface porosity corresponded only to the outermost layers of the fabric structure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 387–394, 2006
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
