Wettability, droplet impact and anti-icing performance of micro-nano hierarchical structure on Ti6Al4V surface via integrating of chemical modification and laser-induced plasma micromachining

Abstract

Superhydrophobic functional surfaces are widely used in medical treatment, pipeline transportation, and ship corrosion protection and have great potential in the field of anti-icing. Ultrafast laser-induced plasma micromachining (LIPMM) combined with a chemical modification of a fluoroalkyl low surface-energy substance (Novec) was used to fabricate superhydrophobic surfaces with periodic layered micro-nano arrays on Ti6Al4V. The wettability, droplet collision behavior and wear resistance of surfaces with different physical and chemical properties were analyzed. In terms of static anti-icing, based on the classical nucleation theory, the icing-delay performance of different surfaces was analyzed. Ice adhesion strength and frosting properties were also studied. It was found that the micro-nano structure surface fabricated by LIPMM had strong hydrophobicity (contact angle of 164°, roll-off angle of 1.0°), high icing delay time (3072 s, 4 μL of water droplet on the surface at −10 °C), low ice adhesion strength (38.2 kPa), and better durability. Additionally, the droplets bounced off this surface after colliding at different angles (0°, 5°, 10°, and 20°). This study provides a feasible solution for fabricating anti-icing surfaces on Ti6A14V.