Abstract
Wettability determines the spreading or adherence behavior of fluids at the solid surface and significantly influences the displacement and entrapment of multiphase fluids in porous media. The present study sets out to determine how wettability controls the imbibition physics of oil and water in a matrix–fracture medium. The displacement and distribution characteristics of fluids, the types of flow regimes, and the fluid morphology under various conditions were revealed in depth. The influences of wettability on oil recovery and energy conversion were analyzed. Finally, the application of the conventional scaling model to simulated imbibition data was also discussed. Results show that the imbibition front is complete and stable in a water-wet medium with the one-end open boundary condition. There are three flow regimes occurring in countercurrent imbibition, depending on the wettability and Ca (capillary number) situations. Increasing θ (contact angle, the affinity of wetting phase to the solid) or Ca can shift the flow pattern from the capillary regime to the capillary-viscous regime to the viscous regime. Additionally, the imbibition oil recovery is greatly affected by wettability, and a more water-wet state does not signify a larger oil recovery. There is a power-law relationship between the oil recovery and the fractal dimension of the nonwetting phase. On the other hand, we performed the energy conversion analysis in the strongly water-wet condition. The external work is positive for both the capillary-viscous and viscous regimes and declines with the decreased Ca. Oil recovery could be linked to the surface energy ratio to some degree, which is relevant to Ca. For the capillary regime, oil recovery is proportional to the final reduced surface energy and does not have an evident relationship with the dissipation energy ratio. Through scaling the recovery factor data vs time via the linear, the power-law, and the conventional models, we find that the conventional scaling model can be used to fit the data point, and the fitting performance is good when Ca is relatively high. However, the linear model is more appropriate when scaling the data in low Ca. Overall, our pore-scale simulation study could pave the way for a further step toward investigating other influencing factors on imbibition behaviors of fluids in more complex media like natural rock materials, which exhibit strong heterogeneity of wettability and pore structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.