Abstract

This paper reports on comprehensive characterization of wettability and interfacial properties of kenaf fibers (KF) and its unsaturated polyester (UPR) composites fabricated by resin transfer molding (RTM). KF were chemically modified by immersing in 6% NaOH concentration for 1, 2, 3, 4, and 5 h to enhance the interaction between KF and UPR. FTIR spectral data showed the chemical changes in KF after treatment which induced the modification of physical and wettability characteristics of KF. The changes in crystalinity index (CrI) and thermal stability of KF content were analyzed using X-ray diffraction (XRD) and thermogravimetry (TGA) techniques, respectively. Scanning electron microscope (SEM) shows a cleaner KF surface upon KF treatment and atomic force microscopy (AFM) signify an increasing in available fiber–matrix specific contact area. Wettability of KF was investigated by means of surface energy measurement using Washburn contact angle principle via Owens–Wendt–Rabel–Kaelble (OWRK) method. Surface energy was found to increase with longer soaking time. The effect of soaking time of alkaline treatment in enhancing the interface bonding characteristic between the KF and UPR matrices can be reflected by the ILSS value of the composites. The highest value of ILSS was recorded by 3 h treated KF composite. POLYM. COMPOS., 2015. © 2015 Society of Plastics Engineers

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.