Abstract
The Fuling gas field in Sichuan Basin, China, has produced greater than 1.5 × 1010 m3 (0.53 tcf) of natural gas from overmature Upper Ordovician Wufeng and lower Silurian Longmaxi shales. To systemically investigate the characteristics of wettability and connectivity and to understand the underlying causes of production behavior, we study five samples of Wufeng and Longmaxi shales with different total organic carbon contents and mineral compositions. Complementary approaches include mercury intrusion capillary pressure (MICP), contact angle measurement, spontaneous imbibition and saturated diffusion, and tracer (both nonsorbing and sorbing) migration mapped via laser ablation inductively coupled plasma mass spectrometry. According to measured contact angles and imbibition tests conducted on aqueous (deionized water and brine) and oleic (n-decane) phases, Wufeng and Longmaxi shales are strongly oil wet and moderately strong water wet. The lower boundary of estimated permeability obtained from n-decane imbibition can reach 137 nd, which is higher than the geometric mean permeability derived from the MICP method (5.5–68.8 nd). Effective diffusion coefficients of the Wufeng and Longmaxi shales are in the range of 10−13 m2/s (1.1 × 10−12 ft2/s). Tests of imbibition and saturated diffusion using tracer-containing brine show that concentrations of nanometer-sized tracers decrease rapidly (a factor of >10) over a migration distance of a few millimeters from the sample edge, suggesting the presence of poorly edge-connected water-wet pores. Sparsely connected hydrophilic pores, mixed wettability, and highly restricted pathways collectively contribute to the limited migration of nano-sized tracers, which probably results in the production behavior of initial steep decline and low overall recovery in the Fuling gas field.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.