Abstract

In fractured reservoirs, the efficiency of water flood is governed by spontaneous imbibition of water into oil-containing matrix blocks. When the matrix is oil-wet or mixed-wet, little oil can be recovered by imbibition. The objective of this work is to identify chemicals that can be added to the injection water that can induce imbibition into an originally mixed-wet, tight, fractured sandstone reservoir. Several surfactants were evaluated for their aqueous stability at the reservoir temperature and salinity. Contact angles were measured on a clay-rich sandstone. Spontaneous imbibition tests were conducted on the reservoir rocks. It is shown that the use of dilute (0.1 wt %) anionic surfactant solution with a large number of ethoxy groups can alter the wettability from oil-wet toward more water-wet conditions on the mineral plates. Incremental oil recovery as high as 68% original oil in place is obtained through spontaneous imbibition experiments performed on tight (∼10 μD) oil-wet/mixed-wet sandstone res...

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.