Well-Flux Surveillance and Ramp-Up Method for Openhole Standalone Screen Completion

Abstract

This article, written by JPT Technology Editor Judy Feder, contains highlights of paper SPE 201662, “A Well-Flux Surveillance and Ramp-Up Method for Openhole Standalone Screen Completion,” by Mehmet Karaaslan and George K. Wong, University of Houston, and Kevin L. Soter, SPE, Shell, et al., prepared for the 2020 SPE Annual Technical Conference and Exhibition, originally scheduled to be held in Denver, Colorado, 5-7 October. The paper has not been peer reviewed. Production and surveillance engineers need practical models to help maximize production while avoiding ramping up the well to an extent that the completion is damaged, causing well impairment or failure. The complete paper presents a well-flux surveillance method to monitor and ramp up production for openhole standalone screen (OH-SAS) completions that optimizes production by considering risks of production impairment and screen-erosion failure. Challenges of Increased Production vs. Well Failure The problem of increased production vs. the risk of well impairment or failure is a pressing problem for sand-control wells in deepwater, where projects tend to have a small number of high-rate wells. In such environments, any well impairments or failures greatly affect the project economics. Following unloading, well surveillance faces the critical step of ramping up to-ward the well’s designed peak rate for the first time when the actual well performance is uncertain. To reduce risk of well impairment or failure, surveillance information and models are needed to help make adjustments during the ramp-up process. Different models are available, from simple to complex and from small to large amounts of input data and computational efforts. Simple nonsurveillance models use field-derived operating limits of completion pressure drop and flow velocity or flux. They are non-surveillance models in the sense that no direct linkage of surveillance results to update flux calculations exists. Simple surveillance models use pressure transient analysis (PTA) results and completion information to evaluate changing well performance and adjust the ramp-up and long-term surveillance operations. The complex surveillance model evaluates well performance and adjusts well operations using probabilistic completion failure risks and coupled reservoir and completion simulations. These models mainly focus on cased-hole gravel pack and frac-pack applications. For openhole completions with sand control, the literature offers limited ramp-up surveillance references. The objective of the well-flux model described in the complete paper is to ramp up the well safely and optimize production using PTA results as surveillance inputs to calculate completion fluxes for well impairment or failure assessment. The method follows an approach presented in the literature.