Abstract
1. High-alloyed porous steel can be welded by means of argon-arc welding, using infusible electrodes, and by means of arc welding in carbon dioxide, using fusible electrodes. Argon-arc welding of steel with a porosity exceeding 30–35% must be performed with an addition. Automatic or semiautomatic welding can be used in dependence on the configuration of the joints and the number of articles to be produced. 2. Austenite wire which secures an austenite-ferrite or a ferrite-austenite (nor more than 60% ferrite) microstructure in the seam metal (standard Sv-08Kh20N9G7T, Sv-08Kh20N10G6, Sv-10Kh20N15, or Sv-06Khl9N9T wire) can be used as the additional material in argon-arc welding and welding in carbon dioxide of porous ferrite and martensite steels. 3. The mechanical properties and the intercrystallite corrosion resistance of welded joints of porous steel Kh17N2 are satisfactory. High-temperature annealing (1200°C, 1 h) in a hydrogen medium with subsequent normalization promotes the reduction of oxide films and improves the intercrystallite corrosion resistance of the metal in the zone near the seam in welded joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.