Abstract
Abstract Explosive welding is one of the joining techniques which employs high energies derived from explosives to join materials with similar and dissimilar properties. In this paper, the weldability criteria which should be met to achieve good welds were calculated for aluminum–copper joints. Different morphologies for welding interface (straight, wavy and melted layer) were obtained with changing welding parameters. Results on the microstructure, micro-hardness and tensile-shear tests were reported. Tensile-shear test results indicate that shear bond strength increases with increasing explosive ratio. However, shear bond strength decreases when the explosive ratio exceeds R = 2.2 due to the formation of brittle intermetallics at the interface. This knowledge may be utilized for establishment of a relation between microstructure and properties in the process of manufacturing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have