Abstract
Purpose – The purpose of this paper is to study the resistance of wood-polypropylene and wood-wollastonite-polypropylene composites containing pigments to natural weathering. Design/methodology/approach – Natural weathering of composites was conducted in Finnish climatic conditions for one year. The colour of the composites was determined with a spectrophotometer, the morphology of the composite surface was analysed by scanning electron microscopy (SEM), and the changes in the polymer structure in surface layer of the composites were analysed with differential scanning calorimetry (DSC). Charpy impact strength was determined with an impact tester. Findings – The pigments used in this study reduced the colour change of the composites exposed to outdoor weathering as compared with the un-coloured composite. The carbon black pigment was more effective than the iron oxide pigment. Moreover, only the carbon black pigment was found to reduce the degradation of the surface layer of the composites. The addition of the carbon black pigment had a positive effect on the dimensional stability of the composites in a water absorption test. Only the combination of the carbon black pigment and wollastonite resulted in a composite which was capable to retain its Charpy impact strength both after one year of outdoor weathering and cyclic treatment. Research limitations/implications – This study is a part of continuous research on the development of wood-polymer composites (WPUs) suitable for outdoor applications in Finnish climatic conditions. The first part of the study, which has been published earlier, showed the results of weathering of composites in accelerated tests in comparison with 1,000 hours outdoor exposure during summer time (June and July). Outdoor weathering limited to 1,000 hours cannot give an objective view on the weathering behaviour of composites in Finnish climatic conditions. The results of the current study were obtained from one-year outdoor exposure of composites. Originality/value – The wood-polypropylene composite made with the combination of the carbon black pigment and wollastonite can be recommended for outdoor applications. The study provides useful information on the resistance of wood-polypropylene composites to weathering in Finnish climatic conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.