Abstract
The tribological and electrical behavior of e-beam codeposited Au–ZnO nanocomposite films were investigated for compositions in the range 0.1–28.0vol% of ZnO. A 2.0vol% ZnO film did not exhibit measurable wear sliding against a commercial gold alloy rider. Electron backscatter diffraction (EBSD) analysis on film surfaces of varying composition revealed a significant reduction in grain size for a 0.1vol% ZnO film contrasting with a pure Au film. Electrical resistivity measurements of films in the range 0.0–28.0vol% ZnO exhibited a linear increase in resistivity from 2.73μΩcm to 39.88μΩcm. The friction, wear, and electrical contact resistance of 2.0 and 28.0vol% ZnO films sliding against commercially available hardened Au riders (72Au–14Cu–8Pt–5Ag by weight) were investigated. Friction coefficient and electrical contact resistance data were in the range μ=0.3–0.5 and ECR=40mΩ and 500–2000mΩ, respectively, for 2μm thick films deposited on conductive substrates in unidirectional sliding at 1mm/s under a 185MPa maximum Hertzian contact pressure (100mN contact force). The presence of ZnO transfer to the rider was observed via energy-dispersive X-ray spectroscopy (EDS). Significant improvements in wear resistance and friction behavior were observed for Au–ZnO composite films with volume fractions of ZnO commensurate with the metal species codeposited in traditional hardened gold coatings.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
