Wear Resistance Evaluation of Self-Fluxing Nickel-Based Coating Deposited on AISI 4340 Steel by Atmospheric Plasma Spray

Abstract

Materials with enhanced wear resistance are constantly in high demand. Nickel-based self-fluxing materials deposited by atmospheric plasma spraying (APS) have feasible wear resistance performance. This study aimed to evaluate the results of a nickel-based self-fluxing alloy coating deposited on AISI 4340 steel substrate using APS. Additionally, the temperature at which the remelting process achieved optimal results was investigated. The AISI 4340 steel substrate samples were coated with a self-fluxing NiCrBSiCFe powder by APS. The post-coating remelting process was performed in a controlled atmosphere tube furnace at 900, 1000, and 1100 °C. Microstructural analysis was carried out by Scanning Electron Microscopy (SEM) before and after remelting. The estimated porosity of the as-sprayed sample was 3.28%, while the remelted coating sample at 1100 °C had only 0.22% porosity. Furthermore, a microhardness measurement was conducted, and the best condition yielded an average value of 750 HV0.5. Tribological tests were performed to evaluate the coefficient of friction and wear rates, revealing that at 1100 °C, the as-sprayed coating had a wear rate of 9.16 × 10−5 [mm3/(N*m] and the remelted coating had 4.106 × 10−5 [mm3/(N*m]. The wear-loss volume was determined to be 14.1 mm3 for the as-sprayed coating sample and 3.6 mm3 for the remelted coating at 1100 °C.