Abstract
This study investigated the wear prediction of BTA drills for laminated Inconel 625 deposited metal and FeCr alloy materials using 3D finite element modelling. High interface temperature owing to increased cutting speed enhances the abrasive wear mechanism of Inconel 625, while FeCr alloy exhibits a predominantly adhesive wear mechanism. The interface temperature and normal pressure required as inputs for tool-wear prediction were obtained using response surface methodology (RSM), which was developed by combining the central composite design (CCD) with finite element method simulation. This approach significantly improved the computational efficiency and provides accurate predictions with the calibrated friction model. A modified Usui wear model was established considering the sensitivity of temperature to wear rate for Inconel 625. A significant improvement in prediction accuracy was observed compared with the original Usui equation. The proposed tool-wear prediction model was validated through experimental tests. The maximum predicted flank wear width deviations for the outer and intermediate edges of BTA drill were 2% and 7%, respectively. The results demonstrate the effectiveness of the proposed BTA drill wear-prediction approach for laminated materials with different wear characteristics, providing theoretical guidance for cutting-parameter optimisation and tool-replacement strategies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.