Abstract
In this paper, wear and friction behaviour of high-speed steel (HSS) and indefinite chill (IC) material for rolling a ferritic stainless steel were investigated on a tribometer. A disk specimen of the ferritic stainless steel-B445J1M was pre-oxidised at 1100°C for 30min, and then rotated against a pin at 500°C for 30min. The pin was made of HSS or IC material. It was found that the friction coefficient of the IC was lower than that of the HSS, but the mass loss of the HSS pin was less than that of the IC pin. The oxide scale of the disk was more easily worn out and attached on the HSS pin than that of the IC pin.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
