Abstract

A wavelength-tunable double-ring cavity erbium-doped random fiber laser (RFL) based on a Mach–Zehnder interferometer (MZI) was proposed in this study. The MZI structure, which was based on two 2 × 2 optical fiber couplers, exhibits a comb-filtering effect. Rayleigh scattering (RS) was generated by a 10-km-long single-mode fiber (SMF) to provide randomly distributed feedback. A double-ring cavity structure based on forward and backward RS was built using two 2 × 2 fiber couplers. The threshold of the laser was 104 mW, and the slope efficiency of the total power output to the pump power was approximately 1.2%. When the pump power was 158 mW, a laser beam with a wavelength of 1555.3 nm was formed. By adjusting the polarization controller (PC), a single-wavelength switched RFL at 1547.9 nm and 1559.6 nm was obtained. The maximum peak power difference was less than 0.67 dB, the signal-to-noise ratio (SNR) was greater than 17.27 dB, and the peak power fluctuation was less than 0.92 dB during a scan time of 30 min at 25 °C. Regarding dual-wavelength switchable laser emission, two groups of different wavelengths with an SNR greater than 16.88 dB, power fluctuation less than 0.81 dB, and wavelength fluctuation less than 0.26 nm could be achieved under the same monitoring conditions. By further adjusting the PC, three- and four-wavelength RFLs were achieved, and the SNRs exceeded 16.31 dB and 14.64 dB, respectively. The proposed RFL has promising application prospects for distributed sensing systems and speckle imaging.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call