Abstract
X-ray free electron lasers (XFELs) provide femtosecond high-power x-ray beams with high spatial coherence, resulting in numerous influential discoveries. Diffractive optics allow for the easy manipulation and measurement of an x-ray beam's wavefront and enable the realization of complex designed properties and specifications. For example, phase gratings can be used as x-ray beam splitters to enable beam sharing by multiple end stations or in-situ beam monitoring, including spectrum and wavefront measurements. Wavefront preservation and high efficiency and survivability under high power are requirements for such beam splitters. Diamond is the most suitable choice for phase grating fabrication, due to its high thermal conductivity that enables it to survive high average power XFEL beams. We have fabricated a large area (2×2 mm2) high aspect ratio (13:1) diamond grating on a diamond plate. Testing was performed at 9.5 keV and resulted in a high splitting efficiency (30%). Tunable efficiency was obtained via tilting the grating with respect to the x-ray beam. Wavefront fidelity of the split beams were measured to less than λ/100 using a Talbot wavefront sensor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
