Wave Impact Experiment of a GBS Model in Large Waves

Abstract

For the design of offshore structures in harsh wave environments, model testing continues to be the recommended industry practice for determining wave impact forces on offshore structures. Accurate measurements of wave impacts in model tests have been a challenge for several decades. Transducers are required to accurately capture the short duration, high magnitude, and dynamic nature of impact loads. The structural model, transducers, and the transducer mountings need to be designed such that mechanical vibrations in the integrated transducer-mounting-structural model system do not contaminate the wave impact measurements. In this work, the dynamic oscillations in the measurements were controlled through the design and fabrication of transducers, their mounting and the GBS model. Wave crest probability distributions were developed that included fully nonlinear effects. These distributions were used as a benchmark to qualify the waves in the wave calibration tests. The highly stochastic nature of impact loads makes it challenging to obtain converged probability distributions of the maximum impact loads (i.e. forces or pressures) from model tests. To increase the confidence in the statistical values of wave impact loads, a large number of realizations were used for a given sea state. Variability of the maximum pressure due to wave basin effects (such as wait-time between tests) was examined with fifteen repeat tests using the same wave maker control signal. These tests provided insights into the random behavior of the impact loads.