Abstract
The reliability of the absorbing layer is crucial for realizing protective engineering’s protection function. However, the typical wave-absorbing material, sand, is unable to fulfill its intended wave-absorbing function in areas with seasonally frozen soil. This is because the internal pores of the material become filled with ice and the particles freeze. To address this issue, alumina thin-walled hollow particles were chosen as a new wave-absorbing material. These particles can introduce the gas phase into the absorbing layer which is essential for attenuating the stress waves and its wave-absorbing capacity under freezing conditions was investigated by the split Hopkinson bar (SHPB) test. According to the test data, the alumina thin-walled hollow particles are less dense than sand and have a lower wave impedance, allowing them to reflect more incident energy. Moreover, these particles have a better capacity for dissipating the absorbed energy, as compared to sand. Under freezing circumstances, the average transmittance coefficient of alumina thin-walled hollow particles is only 21.95% to 49.30% of ordinary sand. Additionally, the particle size positively correlates with the capacity for wave-absorption. The capacity of alumina thin-walled hollow particles to shatter and release the gas phase under impact stress significantly increases the compressibility of the absorbing layer under freezing conditions, which accounts for their enhanced wave-absorbing effectiveness. The stress-strain curve specifically manifests as a smoother curve and a longer stage of plastic energy dissipation. Other than that, the dynamic deformation modulus of the material and peak stress is lower, while the peak strain is larger. The findings of this study provide a low-cost, high-reliability solution to the problem of frost damage in the absorbing layer in regions with seasonal freezing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.