Abstract
The characterization of microwave subsurface holographic RADAR sensors is not simple because the investigated medium is generally not homogeneous, and the soil electromagnetic properties change with moisture content. Commonly, holographic radars designed for terrain investigations use sand-box testbeds. To ensure the homogeneity of the medium and a well-defined value of dielectric permittivity and conductivity (attenuation), we designed and fabricated a testbed filled with water. With a solution of Sodium Chloride concentration at room temperature, it is possible to obtain a specific dielectric permittivity and the desired attenuation. In this paper we describe the design process, the fabrication, and a preliminary experiment with distilled water using a plastic candy box as a target. This approach to the fabrication of a RADAR testbed guarantees the repeatability of the measurements reducing the number of uncontrolled variables in laboratory experiments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.