Abstract

In the Lithuanian metal working plants galvanotechnical slime is formed during the manufacturing process. It consists of Fe, Ca, Mg and combinations of microelements Cr, Mn, Co, Ni, Cu, Zn, Cd, Pb such as hydroxide, sulphide etc. To prevent contamination of the environment by metal combinations contained in the galvanotechnical slime it has to be utilized for ceramic products during the manufacturing process. In Lithuania the galvanotechnical slime is utilized for ceramzite produced in the Palemonas factory. The aim of this work is to find out whether the microelements contained in galvanotechnical slime are emitted from ceramzite into the environment while ceramzite is affected by water. There is hydromical clay in Lithuania. Cremate clay contains 70—95% of hydromicas, 5—30% kaolinite, and up to 5% of chlorite and traces of montmorillonite. It contains quartz, feldspars, calcite and limonite as well. Oxidical structure (%) is: SiO2 48–51, Al2O3 + TiO2 14—19, Fe2O3 5—8, CaO 7–11, MgO ∼ 3, K2O ∼ 3, Na2O ∼ 1, SO3 up to 0.4, loss by roasting 10—13. In producing ceramzite (1050—125°C) mullite, quartz, hematite, magnetite, anorthite, spinel, forsterite etc. are formed from clay components. If ceramzite contains galvanotechnical slime, the microelements along with ceramzite components compounds thermodynamically a few of Ca, Mg, Fe, Ni, Cu, Zn silicates and aluminates and Ca, Mg, Ni, Cu ferrites. The amount of microelements transferring from ceramzite into water has been defined with the atomicabsorption spectroscopy by keeping ceramzite granules in distilled water for 3,6 and 12 months. The results of the investigation demonstrate that the compounds of Cr, Ni, Cd, Pb, Mn, and Co do not transfer from ceramzite into water. The amounts of metallic compounds in the water C H 2 O are limited by the values of their solubility product L: C H 2 O = 5,62 Cmax L0,087, The amount of metallic compounds in the water C H 2 O depends on the extraction length according to the satiation curve. The results of the investigation show that ceramzite containing galvanotechnical slime is an ecologically clean heat insulating substance.

Highlights

  • In the Lithuanian metal working plants galvanotechnical slime is formed during the manufacturing process

  • It consists of Fe

  • prevent contamination of the environment by metal combinations contained in the galvanotechnical slime

Read more

Summary

Kaolinitas

Montmorilonitas Kaitinant montmorilonitll vyksta sic procesai [13]: 100-250°C - pasisalina higroskopinis vanduo;. 700°C - pasisalina tarppaketinis vanduo; 9oooc pasisalina OR jonq vanduo ir issiskiria spinelio bei stikline fazes; 950 - l200°C - susidaro mulitas, kristobalitas, spinelis ir stiklas; virs 12oooc - susidaro mulitas ir stiklas. Pagal [11 ], kaitinant montmorilonit& fiksuojarni endoterrniniai efektai esant 135, 612, 850°C. Pagal [9], kaitinant montmorilonit& didzioji dalis tarpsluoksnio vandens pasisalina esant 100 - 300oC; OR jonq vanduo pasisalina esant 300 - 750°C; struktiira suyra esant 800 -900°C. Kadangi montmorilonito Lietuvos kcramzitiniuose moliuose yra labai ncdaug, sios molio sudetines dalies itaka keramzito sudeCiai nedidele

Hidrozeruciai
Mineralogine keramzito sudelis
Mikroelementai buvo ekstrahuojarni taip
Tyrimq rezultatai ir jq aptarimas
ISvados
Summary
Conclusions
Findings
The amount of metal ions which transfer into water
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call