Abstract
Urea, in either solid form or in solution, is an additive commonly used to control the viscosity or act as a scavenger in MF (melamine-formaldehyde) and MUF (melamine-urea-formaldehyde) resins for particleboard production. The aim of this work was to evaluate the influence of adding urea to MF (melamine-formaldehyde) resin in terms of the water-resistance of the final particleboards. FTIR-ATR spectroscopy, adhesive bonding evaluation system (ABES) and gravimetric techniques were used. MF and MFU (melamine-formaldehyde-urea) resins were prepared. Urea was introduced as an additive, in different percentages (0, 10, 20, and 30% (on adhesive, dry basis), and citric acid was used as catalyst. Beech veneer strips were bonded together with these formulations and then tested in dry conditions and after immersion in water for 24 h. The effect of urea load on the resin curing reaction in dry and humid joints was studied. Particleboards were produced with MF and MFU (melamine formaldehyde urea) resins with different urea loads and using industrial recycled wood particles as raw material. Particleboard evaluation indicated that the water resistance of the final particleboards decreased linearly with urea addition.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
