Abstract
In this study, Silver birch (Betula pendula) wood veneers and solid wood blocks were treated with commercial phenol-formaldehyde (PF) resin water solutions. Birch veneers and solid wood blocks of different size were impregnated with PF resin solutions in water with concentrations of 10, 20 and 30 wt%. The weight percent gain (WPG) and bulking after drying and curing of resin treated wood specimens were determined to evaluate the impact of specimen sizes and density. The leaching procedure according to EN 84 was performed to evaluate the PF resin fixation stability. The anti-swelling efficiency (ASE) of untreated and treated specimens during seven soaking-drying cycles was examined. Higher WPG values were obtained for specimens with lower density, but no correlation was found between the specimen size and WPG. The WPG of veneers and solid wood was 8.7 - 17.7% and 8.5 - 24.4%, respectively. The ASE of wood blocks treated with PF resins after the 1st cycle was in the range of 37 - 51% depending on the resin loading in the wood. However, the ASE values decreased after every next soaking-drying cycle, reaching 33 - 48% after the 7th cycle. After leaching, the WPG of specimens decreased by 2.3 - 3.0%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
More From: Key Engineering Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
