Abstract

In this study, for the first time, the experimental technique of positron annihilation lifetime spectroscopy (PALS) has been applied to monitor in situ the microstructural changes of cellulose-based materials, i.e. paper, during water intake. For three different cellulose samples, bleached fine paper without filler, Kraft paper without filler, and a viscose fiber sheet, the mean positron lifetime Delta tau _{mathrm {mean}} showed a strong increase with time in humid atmosphere, but exhibiting different trends depending on the type of sample. For all the cellulose samples investigated, the mean positron lifetime Delta tau _{mathrm {mean}} shows an initial strong increase simultaneously occurring (t<10 h) to the mass increase of the samples due to water intake. Interestingly, the variations of Delta tau _{mathrm {mean}} of the viscose fiber sheet and the Kraft paper sample both show a second increase on longer timescales (t>60 h in humid atmosphere) during which the mass increase of these samples has already been saturated. The results of this study show that by the means of PALS, water transport in paper can be reliably followed over a long timespan and it is even possible to distinguish between different types of cellulose materials. The second stage increase of the mean positron lifetime after long times in humid atmosphere for the Kraft paper sample and the pure viscose sheets even suggest that not only water intake itself can be monitored but also further atomistic processes in the material are accessible.

Highlights

  • Paper is made by spraying a suspension of paper fibers (1-2 weight percent of cellulose fibers) onto a sieve followed by a drying process

  • Note that the variations of the mean positron lifetime Dsmean are given as the absolute difference whereas the variations in the mass change Dm are given as the relative change, for both with respect to the values in the ’dry’ state

  • For the cellulose fiber sheet sample, the overall increase of the mean positron lifetime Dsmean with time in humid atmosphere is higher than it is in the case of Kraft paper and bleached fine paper

Read more

Summary

Introduction

Paper is made by spraying a suspension of paper fibers (1-2 weight percent of cellulose fibers) onto a sieve followed by a drying process. The second stage increase of the mean positron lifetime after long times in humid atmosphere for the Kraft paper sample and the pure viscose sheets even suggest that water intake itself can be monitored and further atomistic processes in the material are accessible.

Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call