Water flume study of the enhancement of buoyant rise in pairs of merging plumes

Abstract

When multiple stacks are grouped or ganged together at a site, the effluent plumes are often observed to merge downwind, forming a single buoyant plume whose rate of rise is enhanced relative to the rise of the plumes individually. The magnitude of this rise enhancement depends on many factors, and the few available models for rise enhancement do not always agree with one another. In the present study the rise behaviour of pairs of merging, buoyant plumes was studied by physical modelling in a water flume at 1:500 scale. The experiments were conducted at several stack separation distances and various exit velocity ratios for stack pairs aligned with, or perpendicular to, the ambient flow. Limited experiments were also done with the stacks aligned at other angles to the flow. The stack releases were made buoyant by heating the source water, and the resulting plumes were measured with an array of sensitive temperature probes. From these measurements it was possible to determine the plume structure and rise rates. For small stack separations when the stacks are aligned with the ambient flow, the experimental results show that the enhanced rise is close to, and sometimes above, the maximum theoretical rise enhancement factor of 2 1/3. For the perpendicular orientation there is little or no rise enhancement. The rise enhancement for other stack orientations is somewhere between these two extremes. A plausible physical explanation for the observed behaviour is given, based on initial momentum shielding and line vortex dynamics in the merging plumes.