Water flow path interactions with soil hydraulic properties in till soil at Gårdsjön, Sweden

Abstract

In 1989, in a hydrological research programme within a deacidification project in the Gårdsjön area in southwest Sweden, flow paths and residence times of soil water and groundwater in microcatchments were examined to support the interpretation of the hydrochemical changes. Saturated hydraulic conductivity and soil water retention were analysed on more than 100 cylinder samples. The catchments have shallow sandy-silty till soil with a mean depth in the main catchment of 43 cm. Porosity of the mineral soil in the main catchment was high and ranged from 38 to 85%. The samples from the B-horizon had generally higher porosity. Porosity and the content of organic matter were correlated. The soil water retention was relatively high at all tensions, likely owing to the high content of organic matter. Dissolved organic substances were most probably transported from the shallow soil on the steep sides of the catchment down to the valley where it precipitated. The high porosities could be a consequence of long-term weathering, provided that the organic substances present have increased the leaching of the weathering products. Measured values of saturated hydraulic conductivity were close to log-normally distributed with a mean for all samples of 3 × 10 −5 m s −1. There was a significant increase in conductivity toward the ground surface with the mean conductivity of the samples in the uppermost 10 cm of the mineral soil of 4 × 10 −5 m s −1, which was about 13 times higher than the conductivity of 3 × 10 −6 m s −1 at 1 m depth. From the relationship between runoff at the catchment outlet and groundwater levels, the conductivity was estimated to be 15–200 times higher in the upper soil layer than in the deeper ones. In one profile, 44–64% of the yearly lateral flow was estimated to occur above 30 cm depth. The conductivity was correlated with the content of drainable water, which indicated the importance of the largest pores for the saturated hydraulic conductivity.