Water efficiency and economic assessment of domestic rainwater harvesting systems in buildings with one- to three-floor elevations

Abstract

Abstract The focus of the paper is the evaluation of the performance of domestic rainwater harvesting (DRWH) systems in multi-family buildings with one- to three-floor elevations by means of a cost–benefit analysis. The rainwater is here used for both indoor and outdoor non-potable water consumption. The study was carried out with reference to different residential building typologies (flat and condominium) in a specific local climate condition (Ancona). The buildings are characterized by different rooftop areas (100–400 m2), building floor elevations (one to three floors) and inhabitant numbers (3–54 persons). Moreover, in order to highlight the role of the tank capacity on the performance of DRWH, its capacity was changed in the range 50–200%. The combinations of all these parameters led to 276 test cases. The technical performance is evaluated by means of the water saving and retention efficiencies. The economical assessment is provided by comparing the costs and the savings due to the replacement of the water supplied with the rainwater. It is found that the payback periods changed in the range 10–35 years for the site-specific variables such as local rainfall and water service tariff. Cost–benefit analysis can help the design of DRWH systems, with particular attention to the sizing of the tank.