Abstract
<p>This study was conducted to assessment the environmental impacts in petroleum refineries due to the different processes. The paper presents the data obtained during a case study was achieved in Tobruk petroleum refinery. The main petroleum products of the refinery represented by diesel, light naphtha, heavy naphtha and kerosene with maximum production capacity concerning 21,500 bbl/day. The results of the study revealed that the waste water affected by high concentration of hydrocarbons. The heavy metals are also determined and represented by V, Fe, Ni and Cu with low contents in crude oil. Also the pollutants parameters in the disposal water e.g. biochemical oxygen demand, chemical oxygen demand, total organic carbon, suspended solids, phenols, ammonia and sulphides are determined, and the results are compared with other refinery types. The concentration of these parameters are higher than the standard values that recommended by Environmental Protection Agency (EPA), at the same time these values are less if they are compared with the other refinery types.</p>
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Scientific Research in Science, Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.