Abstract
The passive flux meter (PFM) enables the measurement of cumulative water and contaminant mass fluxes in porous aquifers. It consists of a sorbent material, which is installed in a monitoring well to intercept groundwater flow. Tracer losses and contaminant retention on the sorbent are used to estimate water and contaminant mass fluxes through the device. In the multi-layer PFM different (sorbent) materials are used in an annulus (layer-type) configuration. This allows leached tracers inside the PFM (no tracer release into aquifer) to be retained and facilitates simultaneous deployment of different sorbent types in a single device. In order to estimate undisturbed ambient fluxes in the aquifer, measurements need to be corrected for flow convergence or divergence induced by the well and PFM components. We make use of an analytical solution to the potential flow www.witpress.com, ISSN 1743-3533 (on-line) WIT Transactions on Engineering Sciences, Vol 74, © 201 WIT Press 2 doi:10.2495/AFM120271 Advances in Fluid Mechanics IX 301
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have