Abstract
The water absorption of hemp fiber/unsaturated polyester composites was determined by immersing the samples in water or by exposing them to air with a relative humidity of 94%. The water absorption increased with increasing fiber content. By using images obtained with a magnetic resonance imaging (MRI) system, the moisture absorption process was shown to follow a diffusion mechanism and to be more important in the longitudinal than in the transverse direction. The longitudinal diffusion coefficient was computed to be about 3 × 10–11 m2/s. Composite samples immersed in water reached saturation levels after about eight months and showed no signs of cracking due to swelling. Fibers reached the same saturation limit whether submerged in water or exposed to saturated air when fiber content was less than 21 vol%. Various fiber treatments were tested but none resulted in a substantial increase of the resistance to water absorption. The most effective technique to enhance moisture resistance was to properly seal all the fibers within the matrix. POLYM. COMPOS. 26:509–525, 2005. © 2005 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
