Waste-to-energy: Coal-like refuse derived fuel from hazardous waste and biomass mixture

Abstract

This study aimed to develop Refuse Derived Fuel (RDF) with high Calorific Value (CV) from mixed hazardous wastes and biomass. The potential utilization of newly developed RDF in cement production as a fuel substitute for coal has been investigated. In this work, five types of mixed hazardous industrial wastes (rubber waste, mixed waste, paint sludge, palm oil sludge and wastewater treatment plant sludge) and three biomass types (sawdust, paddy husk and empty fruit bunch) have been used. The newly developed RDF developed in this study has a CV of approximately 18,652 kJ/kg, and its volatile matter, fixed carbon and ash content of 32 %, 40 % and 28 %, respectively. The study is revealed that substituting 5 ton/hour of RDF in the coal only emits about 301 mg/m3 of NOx, which is within the regulatory limits in Malaysia. Besides, the emission of heavy metals, including Zinc, Arsenic, Lead, Copper, Antimony, and Chromium, was also within the regulatory limits. RDF in cement manufacturing kilns is economically and environmentally attractive, as the combustion of RDF allows for a reduction of about 2.25 kg of CO2 per kg compared to coal. In terms of the efficiency of clinker and stack gas emission values, the substitution of 15 % of RDF to the coal at a feeding rate of 5 ton per hour in cement production did not cause any processing and quality issues in the existing cement production process. The result revealed that substituting 15 % of RDF with the coal in 5000 ton/day cement plant may reduce 112.8 USD/hour in operating cost. Additionally, 140 USD/hour of net saving could be achieved by saving 2.52 ton/hour of CO2 emitted from the cement production. Overall, the results concluded that RDF is a very promising resource recovery and waste treatment option for hazardous waste management.