Abstract
This study evaluates the performance of a hybrid supercritical carbon dioxide (SCO2) power cycle, which uses the waste heat of a direct carbon fuel cell (DCFC). Three different configurations including a standalone DCFC, an integrated system consisting of a DCFC coupled with a simple SCO2, and another hybrid system consisting of a DCFC and a partial cooling SCO2 are examined and characterized. In the proposed systems, the effects of the electric current density, operating temperature, anode dimensions, and the pinch point temperature difference in the SCO2 evaporator are then discussed. Considering the optimum operational region of the supercritical cycle, the partial cooling SCO2 was found to be a very promising power cycle for coupling with DCFC. Integrating a supercritical CO2 cycle with DCFC can compensate for the loss of efficiency and power density caused by decrease in fuel cell temperature. There is even an operating window in which the performance of the introduced integrated systems is practically independent of the fuel cell temperature. Results show that at the current density of 1000 A/m2, the rate of change in power density and efficiency of the standalone DCFC system is 0.47 W/m2 and 0.058% per unit of fuel cell temperature, respectively. For the integrated DCFC and partial cooling SCO2 system, however, those rates reduce to 0.13 W/m2 and 0.02% per unit of temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.