Abstract
Approximately 6,000 pounds (2,722 kg) of cotton that had been washed in lap form with 66°C water (as described in Part I) were successfully processed into 100% cotton and 50/50 cotton/polyester open-end and ring-spun yarns at normal production rates and woven into fabrics. The performance of the washed cotton was not as good as the unwashed cotton in some respects: occasional static electricity, higher card neps, weaker yarns, poorer quality yarns (particularly in the combed blend), and better in others: reduction in rotor dust and ends down in open-end spinning. These shortcom ings in processability have been ascribed to the excessive working of the fiber in preparation for washing and subsequent processing, and the need for modified fiber finishes to compensate for fiber surfaces changes that occurred during washing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.