Warpage control and interface characteristics of Ti/Al composite plates by differential temperatures rolling with mobile induction heating

Abstract

This study addresses the issue of warping and low interfacial bonding strength in composite plates due to uncoordinated deformation during the rolling of titanium/aluminum composites. By adopting mobile induction heating with differential temperature rolling composite technology, heated titanium plates and room-temperature aluminum plates were successfully rolled into composites. The results show that when the titanium plate is heated to 500–900°C, the warpage of the titanium/aluminum composite plates first decreases and then increases, while the interface shear strength first increases and then decreases. It is particularly emphasized that the rolled composite plates is straight at 800°C, the Ti6O oxide layer formed on the titanium plate surface exhibits excellent adhesion to the substrate, while displaying susceptibility to cracks during the rolling process, allowing fresh aluminum metal to be squeezed into the cracks to form a mechanical mesh and an atomic bonding diffusion layer occurs due to the fresh metal contact between titanium and aluminum within the crack, thereby resulting in the composite plates exhibiting optimal shear strength. The findings verify the preliminary feasibility of the proposed novel rolling process and provide a novel solution for prepared titanium/aluminum composite plates, which is an important step for future fabrication and applications of composite plates.