Abstract
The aim of this study was to understand the warp and weft directional tensile properties of the developed two dimensional (2D) multistitched multilayer E-glass/polyester woven nano composites. It was found that the warp and weft directional specific tensile strength and modulus of unstitched structure were higher than those of the machine stitched and machine stitched/nano structures due to stitching caused filament breakages. When the nano silica material in the unstitched E-glass/polyester composite structure increased, the warp and weft directional specific tensile strength and the modulus of the unstitched/nano structures increased. The failure of warp and weft directional 2D unstitched and unstitched/nano woven E-glass/polyester composite structures had a complete delamination in their cross-sections. But, the failure of warp and weft directional 2D stitched and stitched/nano woven E-glass/polyester composite structures had a local delamination in their cross-sections and the failure was confined at a narrow area. The warp and weft directional specific damaged areas of unstitched structure were higher than those of the stitched and stitched/nano structures. Also, the warp and weft directional specific damaged areas of machine stitched structure were slightly higher than those of the machine stitched/nano structure. It could be concluded that the addition of nano silica to the stitched structures improved to their damage resistance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have