Wall-mounted flexible plates in a two-dimensional channel trigger early flow instabilities.

Abstract

A high level of mixing by passive means is a desirable feature in microchannels for various applications, and use of flexible obstacles (or plates) is one of the prime choices in that regard. To gain further insight, we carry out two-dimensional numerical simulations for flow past one or two flexible plates anchored to a channel's opposite walls using a fluid-structure interaction framework. For the inlet flow Reynolds number vs the Strouhal number plane, we observe a sudden flow change from a laminar to a time-periodic vortex shedding state when flexible plates are present in the channel. We found the critical Reynolds number to be Re_{cr}≈370 when a single plate is anchored on the channel wall and Re_{cr}≈290 or even lower when two plates are anchored. With an increase in the inlet flow Reynolds number (up to 3200), we found that vortices detach regularly at the plates' tips, which causes the flow to meander in the channel. In a two-plate anchored configuration, primary vortices generated at the first plate are constrained by the second plate and result in an energetic secondary vortex generation in the downstream side. The overall flow features and the energy dissipation in the channel are mainly controlled by the separation gap between the plates. At high-inlet-flow Reynolds numbers (≥1600), the probability density function (F) of the kinetic energy dissipation in a flexible plate configuration shows a stretched exponential shape in the form F(Z)∼1/sqrt[Z]e^{-pZ^{q}}, where Z is the normalized kinetic energy dissipation and the constants p=0.89 and q=0.86. The observed increase in energy dissipation comes at the cost of an increase in pressure loss in the channel, and we found that the loss is inversely related to the plates' separation gap. From our simulations, we found that if high mixing levels are desired, then two flexible plates anchored to the channel walls is a better choice than a channel flow without obstacles or flow past a single plate. The two-plate configuration with zero separation gap between the plates is best suited to achieve a high mixing level.