Wall‐resolved large eddy simulation of turbulent flows in helically ribbed steam cracker reactors

Abstract

AbstractHelically ribbed coils are commonly applied in steam cracking furnaces. To fully understand the impact of these ribbed wall modifications on the local heat transfer and associated pressure drop throughout the reactor, detailed experimental, and numerical studies have been performed. Experimental data based on stereo‐particle image velocimetry (S‐PIV) and liquid crystal thermography have been used to validate the numerical results from wall‐resolved large eddy simulations using OpenFOAM. The validation shows an excellent agreement in terms of mean and fluctuating velocities, pressure drop, and heat transfer behavior in a discontinuously ribbed tube. Compared with the pressure drop in a continuously ribbed tube, an approximately 40% lower pressure drop is obtained with a discontinuously ribbed tube, at the cost of a slightly decreased heat transfer enhancement. This makes the discontinuously ribbed tube design particularly interesting for steam cracking applications. The results also show that the nonuniform heat transfer at the wall is inherently linked to the flow reattachment and recirculation zones caused by the rib. Finally, the validated numerical model was used to study comparable designs and propose novel helical rib designs. Based on the results of the study, enlarging the trailing edge of the conventional ribbed geometry will improve the thermal enhancement performance, and is therefore found most promising for steam cracking reactor design.