Właściwości reologiczne cieczy sprężysto-lepkoplastycznej

Abstract

A model for the motion of a compressible elastic-viscous-plastic fluid in a round pipe is proposed. The main indicators of the flow, volume flow and speed are obtained. Numerous hydrodynamic processes are associated with the properties of liquids. It is known that the mechanical and physical properties of liquids can be described by various models. Various models have been proposed that partially describe the processes of hydromechanics. The proposed model makes it possible to qualitatively describe the deformation processes that occur in various systems. To describe a closed theory of motion of a continuous medium and, in particular, between stress and strain, it is necessary to have a mechanical model. From the literature analysis it is known that there are simple models, which include elastic, viscous and plastic. At the same time, it should be noted that the mechanical model partially shows the mechanical state of the elastic body in the form of Hooke's law. Practice shows that there are more complex liquids that do not obey this law. One of these fluids is an elastic-viscous-plastic fluid. In this work, a model is proposed that describes the elastic-viscous-plastic properties of liquids, which sequentially connects the elastic and viscous-plastic elements. For such a medium, the total resistance will be the sum of the stress corresponding to the elastic deformation and the stress caused by the viscous-plastic resistance. Based on the proposed model, an equation is obtained taking into account the coefficient of volumetric elastic expansion, and an equation is obtained for determining the velocity distribution over the pipe section and volume flow for a given liquid. Calculations have shown that with an increase in compressibility, the flow rate of the liquid partially increases, which in some practical cases produces a positive effect.