W and Related Alloys Deposited onto InP by RT-LPCVD

Abstract

ABSTRACTTungsten (W) films were deposited onto InP in a cold wall, rapid thermal low-pressure chemical vapor deposition (RT-LPCVD) reactor, from a tungsten hexafluoride (WF6) gas reduced by hydrogran (H2). W films of thickness 50 to 450 nm were deposited in the temperature range of 350° to 550°C, pressure range of 0.5 to 4.5 Torr and deposition rates up to 4 nm/sec with an apparent activation energy of about 1.12 eV. The film stress varied depending upon the deposition pressure, from low compressive for deposition at 0.5 Torr to moderate tensile for deposition at about 4.5 Torr. The films were aged at temperatures as high as 300°C for about 800 hr and exhibited an excellent mechanical stability. Post-deposition sintering of the W films at temperatures up to 600°C led to reduction of the resistivity with a minimum value of about 55μΩ-crn as a result of heating at 500°C. Conditions for both selective and blanket deposition were defined, and a dry etching process for further geometrical definitions of the films was developed, providing etch rates of 40 to 50 nm·sec-1. This report reflects the first attempt to deposit W films onto III-V semiconductor at a very high rate by means of RT-LPCVD.