Vortex dynamics during acoustic-mode transition in channel branches

Abstract

The vortex dynamics during acoustic mode transition in channel branches were experimentally investigated with phase-locking particle image velocimetry (PIV) measurements. Particularly, a real-time waveform recognition approach, based on an offline pressure analysis by dynamic mode decomposition (DMD) and a real-time computation by field programmable gate array, was established. In the offline DMD analysis, energetic pressure DMD modes during acoustic mode transition were extracted from pressure data measured by a pressure transducer array and found to agree well with the natural acoustic standing-wave modes numerically determined from an acoustic modal analysis. The acoustic mode transition process was classified into three successive phases: Phase-I: hybrid acoustic modulations, Phase-II: no acoustic modulation, and Phase-III: third-order acoustic modulation. Subsequently, the vortex dynamics corresponding to Phase-I and Phase-III were determined by phase-locking PIV measurements with the real-time waveform recognition approach. The results are summarized as follows. (1) The vortex dynamics coupled with the first acoustic standing-wave mode in Phase-I were related to the first shear layer hydrodynamic mode in channel branches. (2) The vortex dynamics coupled with the second acoustic standing-wave mode in Phase-I were recognized as the signatures of the second shear layer hydrodynamic mode. (3) However, in Phase-III of the acoustic mode transition, modulated by the third acoustic standing-wave mode, the corresponding vortex dynamics fully developed into a second shear layer hydrodynamic mode. This work provides a better understanding of the complex vortex dynamics of channel flows with broad implications for industrial piping systems.