Abstract
The air moving capacity of a transverse-inlet multiple-disk fan has been measured experimentally and the results successfully collapsed with a simple scaling law. The disk fan studied was an array of several hundred closely spaced plastic disks that rotated about a common axis inside an approximately semicylindrical housing. A splitter plate lying parallel to the axis of rotation and tangent to the disks separated the inflow and outflow streams. The volume flow rate of air per unit length along the axis of rotation was measured using standard LDV techniques. For disk spacings greater than 1 mm, the volume flow rate was found to be essentially proportional to ωhR3, where ω = radian rotation rate of the disks, h = disk spacing, and R = disk radius. This scaling law was derived from a simple force balance for a small fluid element moving between rotating disks. The Reynolds number of the experiments, ωh3R/ν, was varied from 2 × 102 to 103. In addition, the air-moving capability of the disk fan was found to be nearly independent of the geometrical placement of the rotating disks within the fan housing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.